HỖ TRỢ 24/7
- Thiết bị
- Lắp đặt
- Bảo hành
Số 749, Phố Nguyễn Văn Linh, P.Sài Đồng, Q.Long Biên, Hà Nội
Mr Tuấn - 0813.538.555
BẠN CẦN TRỢ GIÚP THÊM? Hotline: 0813.538.555 (Mr Tuấn )
Sản phẩm bán chạy
- Miễn phí tư vấn, thiết kế trạm cấp gas trung tâm và hệ thống dẫn gas cho các toà nhà chung cư, khách sạn, nhà hàng, biệt thự.
- Miễn phí tư vấn, thiết kế trạm chiết nạp LPG, các hệ thống gas sử dụng bồn chứa.
- Miễn phí tư vấn, thiết kế đường ống cấp gas LPG ống thép, ống đồng cho nhà máy, bếp ăn tập thể.
Gas manual reset solenoid valve that can be used both as normally open and as normally closed. Normally open: It closes receiving the signal from gas detector and can be reset only after founded and escluded the leakage that caused the gas detector intervention. IMPORTANT: it must be connected to a gas detector that gives impulse signal, not continuously. Normally closed: It must be considered safety device only when the led on the electric connector of the solenoid valve is always on. It closes without tension (black-out) or receiving the signal from gas detector. If the closing is due to black-out the solenoid valve can be however reset to use domestic users (for example stoves). In this case you are not in safety condition but when tension comes back the solenoid valve closes and it is ready to be reset and to do the safety device function. If the closing is due to a gas detector signal the solenoid valve can be reset only after founded and escluded the leakage that caused the gas detector intervention. Xem chi tiết sản phẩmVui lòng tham khảo cước phí vận chuyển (*)
Xem ảnh sản phẩm
Tải Catalogue
Gas manual reset solenoid valve that can be used both as normally open and as normally closed.
Normally open:
It closes receiving the signal from gas detector and can be reset only after founded and escluded the leakage that caused the gas detector intervention.
IMPORTANT: it must be connected to a gas detector that gives impulse signal, not continuously.
Normally closed:
It must be considered safety device only when the led on the electric connector of the solenoid valve is always on.
It closes without tension (black-out) or receiving the signal from gas detector.
If the closing is due to black-out the solenoid valve can be however reset to use domestic users (for example stoves).
In this case you are not in safety condition but when tension comes back the solenoid valve closes and it is ready to be reset and to do the safety device function.
If the closing is due to a gas detector signal the solenoid valve can be reset only after founded and escluded the leakage that caused the gas detector intervention.
Simply powering the coil does not open the valve. The reset mechanism has to be operated by hand (see MANUAL RESET).
Reference standard EN 161
In conformity with:
- Regulation (EU) 2016/426
- ATEX Directive 2014/34/EU
- 2014/68/EU PED Directive (6 bar versions) (ex 97/23/EC)
- 2014/30/EU EMC Directive (ex 2004/108/EC)
- 2014/35/EU LVD Directive (ex 2006/95/EC)
Sản phẩm tương tự
Tags
- Van điện từ thường đóng, reset bằng tay
- Van điện từ thường đóng, reset tự động
- Van an toàn bồn gas, ống gas
- Van gas ngắt khẩn cấp, ngắt tự động
- Van điện từ thường mở reset bằng tay
- Van điều lượng gas, chống vỡ ống gas
- Van điện từ thường mở reset tự động
- Van điện từ chuyển đổi đường cấp gas
- Van điều khiển bằng khí nén
- Van điều khiển bẳng thuỷ lực
- Van điều khiển bằng điện
- Van điện từ Unid Solenoid - Taiwan
- Van điện từ gas ODE - Italia
- Van điện từ Madas - Italia
- Van xả an toàn Samtech - Italia
Phản hồi
- + Quý khách cần biết thêm về Nguyên lý hoạt động, cách sử dụng sản phẩm hoặc hướng dẫn lắp đặt sản phẩm, thiết bị
- + Quý khách muốn tìm hiểu thêm về giá và chương trình khuyến mại của sản phẩm ?
- + Quý khách cần trợ giúp hoặc có câu hỏi nào về Dịch vụ nhập khẩu, phân phối và lắp đặt thiết bị gas công nghiệp và dân dụng. Vui lòng liên hệ.