Van điện từ gas phòng nổ Madas Ý, M16/RMOJ NA/NC - P.MAX 6 BAR CE-51BR3336

Gas manual reset solenoid valve that can be used both as normally open and as normally closed.

Normally open:
It closes receiving the signal from gas detector and can be reset only after founded and escluded the leakage that caused the gas detector intervention.
IMPORTANT: it must be connected to a gas detector that gives impulse signal, not continuously.

Normally closed:
It must be considered safety device only when the led on the electric connector of the solenoid valve is always on.
It closes without tension (black-out) or receiving the signal from gas detector.
If the closing is due to black-out the solenoid valve can be however reset to use domestic users (for example stoves).
In this case you are not in safety condition but when tension comes back the solenoid valve closes and it is ready to be reset and to do the safety device function.
If the closing is due to a gas detector signal the solenoid valve can be reset only after founded and escluded the leakage that caused the gas detector intervention.

Simply powering the coil does not open the valve. The reset mechanism has to be operated by hand (see MANUAL RESET).

Reference standard EN 161

In conformity with:

• Regulation (EU) 2016/426

• ATEX Directive 2014/34/EU

• 2014/68/EU PED Directive (6 bar versions) (ex 97/23/EC)

• 2014/30/EU EMC Directive (ex 2004/108/EC)

• 2014/35/EU LVD Directive (ex 2006/95/EC)